Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Brakes/Levers/Pads

Avid Avid Replacement Barrel Adjuster
$5.95
- Replacement barrel adjuster for FR5 and SD7 levers - Includes one pair
Avid Disc Bracket Mounting Bolts (Stainless)
$7.00
Attach your IS Mount disc brake brackets with premium SRAM mounting bolts. These bolts are made from stainless steel for a lifetime of use and come with thread-locking compound already applied.
Avid 20R Brake Pads
$8.00
Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.
Avid Rim Wrangler 2 Brake Pad Inserts
$9.00
Slip Avid's Rim Wrangler 2 Brake Pad Inserts into your Rim Wrangler 2 cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze. They're designed for use with linear-pull brakes.
Avid FR-5 Single Brake Lever
$11.00
The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment -- Qwik-Adjust Barrel Adjuster Bend Zone
Avid CPS Hardware Kit (Stainless Steel)
$14.00
Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that make it easy to set up your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get a rub-free setup! This kit includes stainless steel hardware with washers and bolts for both CPS (Caliper Positioning System) mounting and standard (direct-mount)mounting.
Avid Disc Brake Pads (Juicy/BB7/BB5)
$18.00 - $27.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
Avid Rim Wrangler 2 Brake Pads (w/cartridge)
$18.00
Bolt on Avid's Rim Wrangler 2 Brake Pads for excellent stopping power. The cartridge design makes it easy to switch pads when they wear out. They're designed for use with linear-pull brakes.
Avid Shorty Brake Pad Inserts
$18.00
Slip Avid's Shorty Brake Pad Inserts into your Shorty cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.
Avid Front 170mm Post Bracket Hardware Kit
$25.00
Avid's Front 170mm Post Bracket Hardware Kit has everything you need to mount a 170mm rotor (sold separately) to the front of your bike. Kits include mounting bolts and post mount spacers for front brake installation.
Avid Front 180mm/Rear 160mm Post Bracket Hardware Kit
$25.00 - $58.00
Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.
Avid Road/Elixir/DB/Level B1 (2020+) Disc Brake Pads
$25.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
Avid Disc Brake Pads (Code)
$27.00 - $35.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
Avid Shorty Brake Pads (w/cartridge)
$28.00
Bolt on Avid's Shorty Brake Pads for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.
Avid MatchMaker X (Single)
$34.00
Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote (sold separately) for maximum convenience and ease of use.
Avid Hydraulic Line Kit
$35.00 - $45.00
Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.
Avid G2 CleanSweep Rotor
$40.00 - $50.00
Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.
Avid Standard Hardware Kit (Titanium)
$44.00
For the ultimate light-weight brake setup, Avid ditched the concentric caliper-centering washers and gave you titanium bolts to save precious grams. This kit includes ultra-light titanium hardware for standard (direct-mount) mounting.
Avid BB7 MTN Cable Disc Brake Caliper
$61.00
The industry standard cable-actuated disc brake since its introduction is still popular due to smooth ball bearing operation and ease of installation and maintenance. - All calipers have 74mm mounting bolt spacing - For use with long cable-pull levers - Pad retraction and spring tension are adjustable - Includes steel-backed sintered pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull - Hub/Disc Compatibility: 6-Bolt - Rotor Included: No
Bontrager Rubber Brake Cable Boot
$0.99
• Designed to keep dust and dirt out of V-Brake cable/housing systems
Bontrager Carbon Stop Cork Brake Pads
$36.99
The Bontrager Carbon Stop Cork pad was engineered by Keith Bontrager specifically to work with carbon rims. Designed to dissipate heat on long descents and decrease rim wear, they will keep you coolly in control on even the most challenging mountain stages. Key features: - Engineered especially for use with carbon rims - Designed by Keith Bontrager for professional cyclists - Unique cork compound reduces braking heat and wear on rim
Campagnolo Direct Mount Brake
$125.00
Self balancing design allows for completely symmetric set up and pad pressure. Forged alloy skeleton arms are extremely stiff and lightweight. - Includes special compound brake pads for optimal braking on both wet and dry surfaces - Compatible with all tires up to 32mm - Independent adjustment of individual arms - Compatible with all Ergopower shift levers - Brake Mount Type: Direct Mount Road Caliper - Brake Lever Actuation: Short Pull - Pad Type: Cartridge
Campagnolo Record Brakes
$280.00
The World Tour teams trust the braking response of the Super Record brakes and dozens of Pro Continental and Continental teams turn to Record brakes to take on the World Tour champions. To meet this requirement, Campagnolo designed the Record brakes with the same braking performance of the Super Record, so that the braking response is consistently decisive and immediate. The braking power is entrusted to the stiffness of the new structure, which is sealed and offers a strong aerodynamic impact, along with the Campagnolo brake block compound developed by the Campy Tech Lab in Vicenza. If necessary, it is easy for either the mechanic or the racing athlete to act on the cable tightener register.
Cane Creek Non-Aero Brake Lever Hoods
$10.82
• Replacement hoods for road brake levers with traditional, non-aero cable routing • Soft, tacky rubber for a sure grip • Available in black or brown
Cane Creek SCR5 Brake Lever Hoods
$11.00
• Replacement hoods for Cane Creek SCR5 brake levers • Soft, tacky rubber for a sure grip • Available in black or gum
Cane Creek 200TT Brake Levers
$39.00
Cane Creek's 200TT Brake Levers are perfect for bullhorn-style bars and other TT base bars. Aluminum levers and aluminum mounting brackets mean low weight and excellent longevity. There's even a rubber end plug that perfectly sized for your thumb!
Cane Creek 200TT Carbon Brake Levers
$86.00
Cane Creek's 200TT Carbon Brake Levers are perfect for bullhorn-style bars and other TT base bars. Medium length and aerodynamic carbon levers and aluminum mounting brackets mean low weight and excellent longevity. There's even a rubber end plug that perfectly sized for your thumb!
DT Swiss BXP Flash Pro Brake Pads for PR1400 OXiC Wheels
$26.50
High performance compound for alloy wheels improves power and modulation and has excellent stopping power when it's wet out. - Brake pad inserts are made by Swiss Stop - Flash Pro BXP pads fit Shimano and SRAM road caliper brakes
FSA K-Force WE Disc Brake Pads
$21.00
The FSA K-Force WE Disc Brake Pad is designed for maximum heat dissipation and minimum brake fade on long descents. - Sleek design when installed in K-Force WE caliper - Heat sink for maximum heat dissipation - Backing Plate Material: Aluminum - Compound: Semi-Metallic
FSA K-Force WE Disc Rotor
$82.00
- Two-piece rotor design with forged aluminum carrier - Double disc ground stainless steel rub ring - Countersunk rivets and disc screw mount points - Rounded edge shape - Mount Type: 6-Bolt
Page 1 of 7 Next page