Filter By:
- Parts & Accessories (107)
- Cranksets (190)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Cranksets
$69.99
Featuring a JIS square taper standard, our oversized bottom bracket interface showcases a step-down shape specific to the crank arm-length meeting at the pedal boss. Unlike alternative options, no two lengths are the same. Our durable cold-forged cranksets are available in sizes from 135mm through 170mm and employ a 5-bolt 110 BCD chainring pattern.
All JIS square taper standard cranks are compatible with all BSA European-style square taper bottom brackets.
FEATURES
- Oversized Bottom Bracket Interface
- Durable Cold-Forged Construction
- JIS Square Taper Design
COMPATIBILITY
- Box One Bottom Bracket Square-Taper Titanium/Carbon
- Box Two Bottom Bracket Square-Taper Chromoly
- Box Three Square Taper Steel Bottom Bracket
- Box One Chromoly Chainring Bolts
- Box One 7075 Alloy Chainring Bolts
$169.99
The Box Four Crankset features a 2-piece design with an oversized bottom bracket interface. The 24mm spindle is pressed into the drive-side crank arm for durability and easy installation. The non-drive side crank arm features a 2-bolt pinch system for added strength. Our unique 4-bolt 104 BCD spider features a flex-resistant ring for optimum performance.
Box Four Cranks feature steel pedal inserts that require pedal washers and external sealed bearing BSA bottom brackets, and both are provided in the box.
Weight Limit: 115kg (253 lbs) with limitations as per Category 2 of EN 16054:2012 Standard
FEATURES
- Oversized Bottom Bracket Interface
- Dual Pinch Bolts for Even Clamping Force
- Spider with Flex-Resistant Ring
COMPATIBILITY
- Box Two Chainring
- Box One Chromoly Chainring Bolts
- Box One 7075 Alloy Chainring Bolts
- Box Two 24mm bottom bracket
- Box Extremum RacePrep bottom bracket
$309.99
The Box Three Crankset features a hollow-forged 2-piece design with an oversized bottom bracket interface. The 24mm spindle is pressed into the drive-side crank arm for durability and easy installation. The non-drive side crank arm features a 2-bolt pinch system for added strength. Our unique 4-bolt 104 BCD spider features a flex-resistant ring for optimum performance.
Box Three Cranks feature steel pedal inserts that require pedal washers and externally sealed bearing BSA bottom brackets, both provided in the box.
FEATURES
- Hollow Forged Design
- Dual Pinch Bolts for Even Clamping Force
- Spider with Flex-Resistant Ring
COMPATIBILITY
- Box Two Chainring
- Box One Chromoly Chainring Bolts
- Box One 7075 Alloy Chainring Bolts
- Box Two 24mm bottom bracket
- Box Extremum RacePrep bottom bracket
$399.99
All Box One and Two cranksets are engineered and crafted using our Oversized Technology. we all know that there is no use pushing hard on your pedals if you can’t deliver most of that power to the rear wheel. During the creation of our cranks, we were obsessed with Power delivery AKA pedaling stiffness. To reduce lateral deflection at the bottom bracket we chose to enlarge the spindle and the crank arm’s interfaces. We robbed material from unloaded sections to reinforce these zones of high stress. Not only are you going to be more efficient with power delivery, but you’ll also feel the instant response of acceleration. Seen through another lens, less energy will be required to achieve the same elapsed time.
Key differences: The Box One M30 crankset is just as tyrannical as its big brother the Box One M35. Since it's designed for the smaller rider the now 30mm spindle is as extreme to a smaller rider as the 35mm is to a burly world champion. The crank arms are hollow-forged but reduced in size for their application. It is possible to add too much stiffness where the rider will not feel the benefits. Going beyond that point simply adds material which is surplus weight. We’ve removed the stabilizer rings from the spider and removed unneeded material from its legs. These cranks are engineered for smaller-sized racers.
FEATURES
- Oversized Technology™
- Hollow Forged Design
- Large 30mm Alloy Spindle
- Self-Extracting Crank Bolt System
IMPORTANT NOTES
- BB86 frames require Praxis™ part 86-4001B or 86-4001W.
- BB30/PF30 frames require Praxis™ part 68-4001R or 68-5401R.
- T47 frames require Praxis™ part 47-0000.
- Do not use pedal washers when installing pedals onto these cranks. M30-M cranks were designed to be used without pedal washers.
COMPATIBILITY
- Box Two Chainring
- Box One Chromoly Chainring Bolts
- Box One 7075 Alloy Chainring Bolts
- Box Two Oversized bottom bracket M30
$399.99
The Box Two M30-P crankset is a slightly less acute embodiment of our Oversized technology for cranksets. We squeeze in a show-stopping Praxis™ made 30mm that’s been cold-forged from 7075 T6 aluminum and then painstakingly ground to precision. You’ll be relieved to know this will all fit in a European bottom bracket. The crank arms and spider are poached from the Box One M35 model and as a result, you get all that hollow-forged generosity to help you put that power down. These cranks are engineered for the larger-sized racers.
- Oversized Technology™ Hollow Forged Design
- Oversized 30mm Alloy Spindle
- Self-Extracting Crank Bolt System
- 4-bolt 104 BCD Spider with Flex-Resistant Ring
- External BSA 30mm BB Included
- Weight: 28.6oz
- Drive Side Compatibility: Right Hand Drive
- Crankset Style: 2-Piece
- BB Style: Euro
- Chainring BCD: 104
- BB Included: Yes
$419.99
- Stiff oversized hollow-forged aluminum arms for frames with PF30 or BB30 BB shell
- Innovative Praxis 35mm external bottom bracket and oversize aluminum spindle
- Includes an aluminum BB30/PF30 bottom bracket with precision sealed bearings
$41.99
- One-piece chromoly crankset
- 24TPI
- Length: 175mm
- Weight: 997g
$103.99
- 3-piece BMX crankset
- Tubular steel construction for added strength
- 8 spline, 19mm spindle
- Length: 175mm
$179.99
- 2-piece forged alloy crank arms with steel chainring and bolts
- Compatible with 10, 11, and 12-speed 1x drivetrain systems
- Includes 24mm outboard BB with 3 spacers to fit 73 and 68mm BSA threaded frames
- Includes 32T steel 1x chainring
- Spindle Type: 24mm
- Weight: 946g (w/BB)
$216.95
Many top features are packed into the Centaur crankset. The four-arm design allows for independent bolt circles, offering greater stiffness and structural integrity, and also provides additional versatility, as a single crankset is compatible with both standard compact and semi-compact chainrings. Add these features to the first aluminium crankset with an Ultra-Torque axle and the result is a component that is very similar to the top-of-the range part.
- Requires use of Ultra-Torque bottom bracket cups-Double standardized bolt circle diameter allows for use of standard, mid-compact and compact chainrings
- Ultra-Torque axles couple together in the middle of the BB shell via a Hirth Joint that self centers the crank. This results in a very light weight and stiff system that transfers power to the pedals without power loss
- Features Campagnolo X.P.S.S. (eXtreme Performance Shifting System) featuring geometrically optimized chainring teeth. Optimized when mated to a full Campagnolo drivetrain
- Ultra-Torque system have both drive and non-drive side bearings pre-installed
$359.95
The Campagnolo EKAR Crankset is a lightweight and efficient 1x13-speed crank designed for gravel riding and racing.
- The 2-piece crank features a strong and durable 630-grade steel alloy crank axle mated to a lightweight carbon fiber spider and unidirectional carbon fiber arm
- Must be used with a Campagnolo Pro-Tech bottom bracket
- Chainring features a narrow-wide tooth design for efficient drive and maximum chain security
- Easy access to external crank bearings
- Easily interchangeable alloy rings – no need to disassemble the crankset
- Narrow Q-factor – 145.5mm
Specifications:
- Number of Chainrings: Single
- Spindle Interface Type: Campagnolo Ultra-Torque
- Chainring BCD: 123
- Pedal Spindle: 9/16"
- Drivetrain Speeds: 13
$406.45
The Campagnolo Chorus 12-Speed Crankset features lightweight carbon crank arms, and is optimized for Campagnolo's Ultra-Torque crank system.
- Utilizes Campagnolo's Ultra-Torque crank system to provide a very lightweight and stiff system that transfers power to the pedals without power loss
- Directly molded unidirectional carbon fiber cranks, steel axle, and aluminum chainrings provide exceptional stiffness and optimum power transmission
- Symmetrical teeth on the internal chainring allow for fluid and precise transmission, even with extreme cross-chaining
- Chainrings are surface-treated for longer life
- Q-Factor: 145.5mm
- Design is optimized to run multiple chainring combinations
- Number of Chainrings: Double
- Chainline/Hub Compatibility: 130 Hubs, 135/142 Road Disc Hubs > 415 mm Chainstay
- Spindle Interface Type: Campagnolo Ultra-Torque
- Chainring BCD: 96
- Pedal Spindle: 9/16"
- Crank Intended Use: Road
- Drivetrain Speeds: 12
- BB Included: No
- Weight: 686
$577.45
The new Record 12x2 Speed crankset: a new hole-free design for the right-hand crank that optimizes aerodynamics.
The new carbon fiber Record 12x2 Speed crankset with unidirectional finishing guarantees continuity with the finishing of the entire groupset, whilst maintaining the Ultra-Torque bracket system on the steel axle to ensure perfect transmission of power. The new Record 12x2 Speed crankset can be installed on any type of frame, whether or not it is being used with disc brakes because it optimizes the chain line on the frame with a rear hub flange measuring 130, 135 or 142 millimeters without affecting the Q factor that remains constant at 145.5 millimeters.
The innovative design of the outer chainring ensures faster, quieter derailing owing to the contoured pin. The symmetrical design of the inner chainring teeth allows improved stability with chain crossovers.
The double wheel sizing standards (112 and 145 millimeters) enable reducing the weight through greater use of carbon fiber. There are eight fixing screws for increased structural stiffness. The varying number of pins for each of the three chainring combinations (34/50, 36/52, 39/53) facilitates upshifting due to the optimized free strokes associated with each combination. The special drains on the inside of the outer chainrings optimize performance when downshifting in dead spots.
$1,033.95
The new Super Record 12x2 Speed crankset: an intense concentration of innovation that results in the greatest possible stiffness and precision in derailing, whilst providing a dedicated aerodynamic “super design."
The new carbon fiber Super Record 12x2 Speed crankset has been made lighter on the inside through Campagnolo Hollow Technology, which uses the Ultra-Torque bracket system with a titanium axle to transfer all of the force the athlete applies to the pedal to the drivetrain. The new Super Record 12x2 Speed crankset can be installed on any type of frame, whether or not it is being used with disc brakes because it optimizes the chain line on the frame with a rear hub flange measuring 130, 135 or 142 millimeters, without affecting the Q factor, which remains constant at 145.5 millimeters thanks to the new hand crank design.
The use of ceramic Cult bearings leads to obtaining the smooth ride that the Campagnolo brand is known for. The innovative design of the outer chainring ensures faster, quieter derailing owing to the contoured pin. The symmetrical design of the inner chainring teeth allows improved stability with chain crossovers. The double wheel sizing standards (112 and 145 millimeters) combined with the eight fixing screws, optimize weight and stiffness through the increased use of carbon fiber.
The varying number of pins for each of the three chainring combinations (34/50, 36/52, 39/53) facilitates upshifting due to the optimized free strokes associated with each combination. The special drains on the inside of the outer chainrings optimize performance when downshifting in dead spots.
$35.99
With the conception of our Cane Creek eeWings Titanium crank set we cut no corners, and our CNC-machined preload assembly is no exception. The Cane Creek Crank Preloader is equipped with an aluminum preload ring, an aluminum inner thread ring, and a titanium 2.5mm hex fastening bolt. We are so proud of this piece of jewelry that we decided to design it to fit onto other 30mm crank spindles from SRAM and Raceface, and 28.99mm SRAM Dub Crank spindles. Lose the plastic preload on your crankset, add peace of mind.
- 7075 Aluminum thread ring
- 7075 Aluminum preload spacer adjuster
- Grade 5 Titanium 2.5mm hex fastening bolt
- Fits Raceface 30mm spindles, SRAM 30mm spindles, and SRAM 28.99mm DUB spindles
$55.99
These spiders are optimized to fit Cane Creek's eeWings All-Road cranks, adding more versatility for riders. The spiders will allow direct-mount cranks, such as the eeWings, to accommodate 110 BCD chainring so riders can expand their gearing options.
- Allows riders to run more 1x chainring options
- CNC high grade 7075 series aluminum with black anodized finish
- 50g
$55.99
These spiders are optimized to fit Cane Creek's eeWings All-Road cranks, adding more versatility for riders. The spiders will allow direct-mount cranks, such as the eeWings, to accommodate 110 BCD chainring so riders can expand their gearing options.
- Allows riders to run 2x drivetrain configurations with a smaller 32T chainring
- CNC high grade 7075 series aluminum
- Anodized titanium-gray finish
$1,099.00
The Cane Creek eeWings All-Road titanium crankset offers superior stiffness, durability, and weight savings. This slimmer crank is specifically designed to take on road, gravel, and cyclocross configurations.
- 20%-30% more stiff than premium carbon cranks, while remaining in the same weight range
- Includes CNC machined aluminum bottom bracket preload adjustment ring
- 30mm spindle is compatible with the following bottom brackets: BSA68mm, PF86, BB30 (External Bearing Only), PF30 (External Bearing Only), and 386EVO
- 160mm Q-Factor
- Backed with a 10-year limited warranty
- eeWings Tie-Dye cranks are made from the same high-grade titanium as the standard eeWings cranks and are hand-finished in a blue to purple tie-dye color giving each crank a unique character
- Changes and wear to the color are expected as the cranks are ridden and will not be covered by the warranty
- An optional clear adhesive surface protector will be included in the box to help ensure that the finish lasts over the course of regular use
Number of Chainrings: No Rings Included
- Chainline/Hub Compatibility: 135/142 Road Disc Hubs > 415mm Chainstay, 135/142 Road Disc Hubs < 415mm Chainstay
- Crank Intended Use: Road, Gravel, Cyclocross
- Pedal Spindle: 9/16"
- Spindle Interface Type: BB30/PF30 , 386 EVO , RaceFace/Easton CINCH
- Chainring BCD: Direct Mount SRAM
- Weight: 395
- BB Included: No
$1,099.99
We’ve fit the same outstanding stiffness, durability and weight savings of the eeWings mountain cranks into the slimmer road bottom bracket standard. This includes road, gravel and cyclocross configurations.
- eeWings All Road 170mm, 172.5mm or 175mm
- 30mm Spindle
- 10 Year Warranty"
$1,099.99
Take flight with the eeWings from Cane Creek. These titanium cranks are designed to keep up with the rigorous demands of the most aggressive trail and enduro mountain bikers—though they will benefit any rider who puts a premium on durability, stiffness and weight.
- eeWings Mountain 165mm, 170mm or 175mm
- 30mm Spindle
- 10 year Warranty
$1,299.99
Introducing a new generation of titanium cranks from Cane Creek, the Electric Wings. A 3D-printed titanium crankset designed specifically for E-Bikes. Electric Wings are light weight, stiff, and above all extremely durable.
As light as carbon cranks and as durable as heavy aluminum cranks, the Electric Wings are the only option for E-bike riders looking for both weight savings and durability. Electric Wings are compatible with electric bike drive units that use an ISIS crank spindle and is the best crank upgrade option for both E-MTB and E-Gravel/Road on the market.
$59.99 - $69.99
Dimension Cyclocross Arm Sets made of 6061-T6 aluminum.
- Forged AL-6061-T6
- BB Not Included
- Chainrings Not Included
- 110/74 BCD
- Drivetrain Speeds: 10, 9, 8
- Number of Chainrings: Double
- Pedal Spindle: 9/16-inch
- Spindle interface Type: Square Taper JIS
- Weight: 590g
$19.99
- Asymmetric four arm shape for greater stiffness in the power zones of the pedal stroke
- Compatible with 9/10/11 speed chains, mounts using a common Park BBT-22 tool
$124.99
The Easton EA90 aluminum crankset is optimized for gravel, cyclocross, and road riding styles. It offers the versatility of the CINCH system for a variety of gearing combinations.
- EA90 alloy crank arms are lightweight and feature a matte black anodized finish
- CINCH direct mount technology is compatible with both 1x and 2x setups
- CINCH power meter compatible
- Bottom bracket and chainrings sold separately
- Number of Chainrings: No Rings, No Spider Included
- Chainline/Hub Compatibility: 130 Hubs, 135/142 Road Disc Hubs > 415 mm Chainstay, 135/142 Road Disc Hubs < 415 mm Chainstay
- Crank Intended Use: Cyclocross, Gravel, Road
- Pedal Spindle: 9/16"
- Spindle Interface Type: RaceFace/Easton CINCH
- Drivetrain Speeds: 10, 11
- BB Included: No
$449.99
- Cinch Direct Mount Technology for 1x
- Direct power transfer from stiff carbon fibre construction
- Built for Road, CX, Gravel, Tri, TT
- Chainline: 1x = 47mm, 2x = 45mm
- Weight: 442g (40t, 1x), 590g (2x)
- Q-Factor: 149mm
- Bottom bracket/spider sold seperately
- For 2x configurations, removeable spider required.
$449.99
The EC90 SL crank utilizes the Race Face CINCH technology, which allows for direct mount 1x rings as well as direct mount 2x spiders, and industry-leading versatility. Increasingly popular 1x setups have many advantages including weight and simplicity. Their major limitation is adaptability. A Cyclocross rider's ability to ride a course, then effortlessly change chainrings to their preferred setup is a major necessity that has, until now, been overlooked. Easton refines the design for larger ring applications with improved chain retention while reducing running noise and friction. Arms come assembled with spindle. Rings and BB sold separately.
- EC90 SL carbon arms feature hollow carbon construction, while the spindle and pedal inserts features high-grade aluminum
- CINCH direct mount technology is compatible with both 1x and 2x setups
- CINCH removable spiders and direct mount rings utilize a 20-tooth ISIS BB tool for removal and installation
- Chainline: 1x 47mm / 2x 45mm
- Hub Compatibility: 130 Hubs, 135/142 Road Disc Hubs > 415 mm Chainstay, 135/142 Road Disc Hubs < 415 mm Chainstay
- 30mm spindle
- BB Options: BB86, BSA 68mm, PF30 68mm, BB30 68mm, BBright, 386Evo
- Bottom bracket and chainrings sold separately
$49.99
Genuine replacement parts
Get your bike back on the road with the crankset you need.
- Square taper mounting interface
- For use on select Electra Loft models
$13.99
- Self-extracting bolts for BB30 cranks: includes puller cap that threads into BB30 crank arms
- Sold as singles
Page 1 of 10
Next page