Stems
$54.99
The Box Two Front Top is a modern 1-1/8 inch by 22.2mm stem designed specifically for BMX racing. Box Two Top Load stem bodies are cold-forged and CNC-machined from the highest quality 6061-T6 aluminum. The lightweight front clamps are cold-forged and CNC-machined for increased stiffness and strength.
-Material: 6061-T6 Aluminum
-Process: Cold-Forged
-Hardware: Chromoly Clamping Bolts
-Finish: Anodized w/Laser-Etched Graphics
Weight:
-48mm: 234 g / 8.3 oz
-53mm: 240 g / 8.5 oz
$54.99
The Box Two Front Load is a modern, 22.2 stem designed specifically for BMX racing. Box Two Front Load stem bodies are cold-forged and CNC-machined from the highest quality 6061-T6 aluminum. The lightweight front clamps are cold-forged and CNC-machined for increased stiffness and strength.
-Material: 6061-T6 Aluminum
-Process: Cold-Forged
-Hardware: Chromoly Clamping Bolts
-Finish: Anodized w/Laser-Etched Graphics
Weight:
· 48mm: 224 g / 7.9 oz
· 53mm: 230 g / 8.1 oz
$69.99
All Box stems are engineered and crafted using our Oversized Technology. As we follow the load paths down the handlebars we have focused our attention on the stem-to-bar interface. Since the Oversized handlebars have an increased wall thickness and tube diameter in this sector we have reciprocated with an augmented stem interface with greater surface area. We’ve done this by moving material from low stress areas. This has greatly minimized twist and contributed to responsiveness. As the stem in mated with the handlebars we have contributed to increased pedaling stiffness by providing a backstop to the “lifting” phenomenon. There is no point pushing hard on your pedals if you can’t pull up on your handlebars and deliver that power. Power can easily be lost to handlebar-to-stem deflection and the consequences can be poor power delivery and steering control. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency.
Key differences: This particular model stem pushes our Oversized Technology to the extreme as it maximizes the shift of material from low stress zones to the Oversized interface. These stems are engineered for the smaller-sized racers.
-Lightweight 3D Hollow Design
-Front-Load Clamp Design to Fight Pull-Up Forces
-Large Bar Bore
-Large Hollow Clamping Bolts
-Superior Strength
$69.99
All Box stems are engineered and crafted using our Oversized Technology. As we follow the load paths down the handlebars we have focused our attention on the stem-to-bar interface. Since the Oversized handlebars have an increased wall thickness and tube diameter in this sector we have reciprocated with an augmented stem interface with greater surface area. We’ve done this by moving material from low stress areas. This has greatly minimized twist and contributed to responsiveness. As the stem in mated with the handlebars we have contributed to increased pedaling stiffness by providing a backstop to the “lifting” phenomenon. There is no point pushing hard on your pedals if you can’t pull up on your handlebars and deliver that power. Power can easily be lost to handlebar-to-stem deflection and the consequences can be poor power delivery and steering control. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency.
Key differences: In this particular model stem we’ve modulated the Oversized formula to emphasize pedaling stiffness. We have transferred material specifically to sectors that experience sudden stress from pulling up on the handlebars. You’ll feel a difference in your acceleration. These stems are engineered for the larger-sized racers.
-Material: 6061-T6 Aluminum
-Process: Cold-Forged
-Hardware: Chromoly Clamping Bolts
-Finish: Anodized w/Laser-Etched Graphics
Weight:
-48mm: 280 g / 9.8 oz
-53mm: 290 g / 10.2 oz
$69.99
All Box stems are engineered and crafted using our Oversized Technology. As we follow the load paths down the handlebars we have focused our attention on the stem-to-bar interface. Since the Oversized handlebars have an increased wall thickness and tube diameter in this sector we have reciprocated with an augmented stem interface with greater surface area. We’ve done this by moving material from low stress areas. This has greatly minimized twist and contributed to responsiveness. As the stem in mated with the handlebars we have contributed to increased pedaling stiffness by providing a backstop to the “lifting” phenomenon. There is no point pushing hard on your pedals if you can’t pull up on your handlebars and deliver that power. Power can easily be lost to handlebar-to-stem deflection and the consequences can be poor power delivery and steering control. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency.
Key differences: In this particular model stem we’ve tailored the Oversized strategy to favor utility and access. The geometry has been altered to allow for easy handlebar removal while at the same time scavenging material from low stress zones. Ideal for those who don’t want to compromise on user experience to gain performance. These stems are engineered for the larger-sized racers.
$79.99 - $99.99
Hollow stems are cold forged from the highest quality 6061-T6 aluminum available. Featuring an open skeletal design and a dual mid-bolt wedge mounting system, they are lightweight yet maintain a very high level of strength. A 53mm extension stem weighs just 218 grams/7.7 ounces. By removing the rear pinch bolts and moving the mounting bolts to the middle of the stem, we reduced the weight and size and eliminated a serious hazard to the rider’s knees.
These stems come with either a 48- or 53mm extension and a 22.2mm bar bore. To ensure proper clamping force, the stem must be mounted on a fork with at least 45mm of exposed steerer tube. Not compatible with forks that have carbon fiber steerer tubes.
$24.99
This BMX quill stem combines a steel rod with an alloy top. The 4-bolt top clamp securely fastens handlebars.
$37.99
The DefendR BMX threadless stem has a AL6061 forged alloy construction and a 4-bolt face clamp.
- 30mm stack height
- 240g
$39.99
With its alloy/steel construction and 4-bolt clamp design, the MX is a trusty BMX quill stem.
- Quill Length: 4-1/4-inches
- Quill diameter: 21.1mm
$41.99
With its alloy/steel construction and 4-bolt clamp design, the Freestyle is a trusty BMX quill stem.
- Hollow-core stem bolt
- Quill Length: 4-1/4-inches
- Quill diameter: 21.1mm
$43.99
The BrickTop alloy stem is a classic style, top-mount BMX stem with a 4-bolt handlebar clamp.
$229.99
eeSilk Stem is a fatigue-reducing compliance stem that noticeably reduces vibrations on variable surfaces. With up to 20mm of tunable compliance, an easy single bolt external elastomer change and a soft/firm compliance switch – the eeSilk Stem makes any road, no matter the terrain, smoother.
- Weight: 225g - 235g
- Angle: -6° (only)
- Stack Height: 49mm
- Stem Clamp: 31.8mm
$147.00
Chromag's freshly carved 35mm clamp direct mount BZA stem sets a new standard for exquisite machining detail. Lightweight and solid, with a wide clamping stance, the three-piece design weighs in at a slim 160 grams. Chromag's direct mount stems feature a one-piece main body for consistent placement and overall stiffness. - Boxxer / Fox / 888 direct mount system - 85mm wide clamping stance - Laterally stiff one-piece main body
$36.99
Dimension 25.4 Stem is a fully forged 6061-T6 aluminum stem with 4-bolt handlebar clamp.
- 2-D forged AL-6061-T6
- Four-bolt handlebar clamp
- 41mm height
- Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes
- Weight: 130g-180g
$36.99
For cross country and all-mountain riding, Dimension Trail Stems provide a broad array of sizing options, rigorously tested to ISO 4210 Mountain standards.
- Constructed with AL-6061-T6 aluminum
- Shot-peened finish
- Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes
$36.99
For cross country and all-mountain riding, Dimension Trail Stems provide a broad array of sizing options, rigorously tested to ISO 4210 Mountain standards.
- Constructed with AL-6061-T6 aluminum
- Shot-peened finish
- Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes
$37.00 - $39.00
Dimension 31.8 Stems are fully forged 6061-T6 aluminum stems that have a 4-bolt handlebar clamp.
- 31.8mm can be used with 26.0 bars with additional shim (SM5317)
- Dimension stems are not intended for use with carbon handlebars or carbon steer tubes
- Weight: 130g-180g
$125.00
A 3D-forged, then precision-machined, lightweight, aluminum mountain bike stem in both 31.8mm and 35.0mm models rated for cross country, trail, all-mountain, enduro, and gravity applications.
- Blind bolt holes and shaping
- Cold-forged and precision-machined
- No-gap face plate and clamp area
- Stainless hardware
$280.00
A Trail-Rated, carbon-bodied, 31.8mm stem for mountain bikers seeking best-in-class performance, response, and vibration absorption. The M6 stem is designed to complement the look and ride feel of the ENVE M5 and M6 handlebars.
- Bar Clamp Diameter (mm): 31.8 mm
- Material: Carbon
- S.H.I.S. Stem Clamp Diameter: 28.6
- Stem angle: 0-degree
$280.00 - $300.00
A 35mm clamp diameter, gravity-rated, carbon-bodied mountain stem built for aggressive riding and the muscular look of today’s carbon Enduro and All-Mountain bikes. The M7 stem is designed to complement the look and ride feel of ENVE M7 handlebars.
- Material: Carbon
- Faceplate material: Aluminum
- Hardware material: Titanium
- Clamp Diameter: 35mm
- Steerer Clamp Diameter: 1-1/8-inch
- Torque Spec: 5.5Nm
- Weight: 85g (35mm), 92g (50mm), 99g (65mm)
$300.00
An aerodynamically honed stem with adjustable length and angle to optimize your position. The rider makes up 80-90% of total aero drag, so refining your position can produce some of the biggest gains of all. Further, the shape of the stem, plus the ability to eliminate headset spacers, allows for cleaner airflow at the front of the bike, producing valuable drag reduction. Created in conjunction with Team Dimension Data, the stem delivers the confident and responsive ride feel demanded by the best riders in the world.
This stem is intended for negative drop only and cannot be flipped or reversed in a positive rise.
- Material: Carbon
- Faceplate Material: Aluminum
- Hardware Material: Titanium
- Stack Height: 42.5mm with length shim / 45.5mm with angle shim
- Torque Spec, Face Plate Upper Bolt: 10Nm, Lower Bolt: 6Nm
- Torque Spec, Steer Tube: 5.5Nm
$300.00
The ENVE Road Stem is a staple component in our line and often under-appreciated for the benefits it provides out on the road. The stem plays a key role by connecting your bike to your handlebars and it must manage all the forces that you put into your bike. On the road, the 100% uni-directional carbon body provides a lightweight structure that is torsionally and laterally stiff to ensure that inputs into steering and accelerating are positive and confidence-inspiring. Over rough roads, the carbon fiber laminate helps absorb vibration and reduce hand and upper body fatigue. To further reduce weight, all stem hardware is constructed from lightweight titanium. The faceplate is cold-forged aluminum that allows for a highly reliable and strong grip on the handlebar for responsive steering input with zero slipping.
- Material: Carbon Fiber
- Faceplate Material: Aluminum
- Hardware Material: Titanium
- Stack Height: 41mm
- Torque Spec, Face Plate: 5.5Nm
- Torque Spec, Steer Tube: 5.5Nm
- Weight: 90g (80mm), 107g (90mm), 115g (100mm), 121g (110mm), 126g (120mm), 136g (130mm), 145g (140mm)
$300.00
- 100% uni-directional carbon body provides a lightweight structure that is torsionally and laterally stiff
- Over rough roads the carbon fiber laminate helps absorb vibration and reduce hand and upper body fatigue
- Titanium hardware and lightweight aluminum faceplate
- 107g
$44.99
With its classic blend of high strength and low weight, Easton's EA50 stem is a smart choice for your favorite ride. It's made of 3D forged aluminum for amazing stiffness and strength. Easton's Top-Lock technology locks the stem and faceplate together, creating a highly rigid interface while minimizing the loads on the bolts, making the EA50 perfectly safe for carbon bars.
$44.99
EA50 alloy continues to provide both performance and excellent fitment options at a competitive price. From 3D forging processes to our TopLock technology, Easton alloy stems integrate careful design choices into the lineup. The EA50 stem is also compatible with the ICM integrated Garmin mount.
- 3D Forged EA50 Alloy
- Easton ICM direct-mount faceplate computer mount compatible
- TopLock Design for easy bar installation
- Finish: Black Ano
- Weight: 140 (100mm/7)
- Rise: +/- 7 degrees
- Clamp Diameter: 31.8mm
- Steerer: 1 1/8"
$69.99
EA70 alloy continues to provide an impressive balance of performance and value. From lightweight aluminum tubing, to 3D forging processes and our TopLock technology, Easton alloy stems integrate careful design choices into the lineup. The EA70 stem is also compatible with the ICM integrated Garmin mount.
- 3D Forged EA70 Alloy
- Easton ICM direct-mount faceplate computer mount compatible
- TopLock Design for easy bar installation
- Finish: Black Ano
- Weight: 132g (100mm/0)
- Rise: +/- 7 degrees
- Clamp Diameter: 31.8mm
- Steerer: 1 1/8"
$69.99
Whether you're on the open roads or scenic mountain trails or anywhere else you ride, Easton's EA70 Stem enhances your cycling experience. It's made of 3D forged aluminum for amazing stiffness, low weight and strength for excellent steering control in all conditions. Plus, Easton's TopLock technology locks the stem and faceplate together, creating a highly rigid interface while minimizing loads on the bolts, making the EA70 perfectly safe for carbon bars.
$99.99
Easton’s lightest aluminum stem is the choice of road racers and top XC pilots alike. The advanced EA90 aluminum tubing and 3D forging process results in a perfect blend of strength and weight. Easton’s patented DST distributes clamping forces more evenly over a larger area, making it the perfect stem for today’s lightweight aluminum and carbon handlebars.
- Finish: Black Ano
- Weight: 130g (100mm)
- Rise: Varies
- Clamp diameter: 31.8mm
- Steerer: 1 1/8-inch
- Length: 80mm, 90mm, 100mm, 110mm, 120mm, 130mm
- Materials: EA90 alloy
$99.99
Your stem may seem inconsequential, but it is the point of transfer between your skilled handling and the bike itself. An impressive refinement of our popular top level Easton alloy stem, the newest generation of EA90 stems have an larger boom diameter for increased stiffness and, by utilizing our highest quality alloys, we were able to remove excess material for even more weight savings. We've also created a custom Garmin mount, known as the ICM system, for cleaner lines and improved aerodynamics (included). Our EA90 stem comes in at 120 grams (100mm). With weights like these, we surpass much of the alloy and carbon competition in the market, while giving you the durability, confidence and control you expect from Easton.
- 3D Forged EA90 Alloy
- Easton ICM direct-mount faceplate computer mount compatible
- TopLock Design for easy bar installation
- EA90 includes Easton ICM Garmin computer mount
- Finish: Black Ano
- Weight: 120g (100mm)
- Rise: +/- 7 degrees
- Clamp Diameter: 31.8mm
- Steerer: 1 1/8"
$159.99
Your stem may seem inconsequential, but it is the point of transfer between your skilled handling and the bike itself. An impressive refinement of our popular top level Easton alloy stem, the 2019 EA90 stems have an larger boom diameter for increased stiffness and, by utilizing our highest quality alloys, we were able to remove excess material for even more weight savings. We’ve also created a custom computer mount (included with EA90 stems and sold separately) that is compatible with all ICM faceplate stems for cleaner lines and improved aerodynamics. With lengths ranging from 70mm to 130mm, we can accommodate fits for all sizes of frames and riders. We shaved our new EA90 down to 120 grams for a 100mm stem and, with weights like these, we surpass much of the alloy and carbon competition in the market, while giving you the durability, confidence and control you expect from Easton.
- Finish: Black Ano
- Weight: 120g (100mm)
- Rise: +/- 7-deg
- Clamp diameter: 31.8mm
- Steerer: 1 1/8-inch
- Length: 70mm, 80mm, 90mm, 100mm, 120mm
- Materials: EA90 alloy
- Tech: ICM compatible (faceplate mount included), Top Lock, Taperwall
Page 1 of 6
Next page